NEW 8-1/2″ (215 mm) x .128″ (3.25 mm) SRET Horizontal Strip Accumulator

Stock #: 3370

UTUBE NUMBER: 3370
MANUFACTURER: SRET EQUIPMENT CO. LTD.
MODEL NUMBER: WLHT60
SERIAL NUMBER: NEW, TBD
DELIVERY: Ship from Chinese Port in 12 – 14 Weeks

SPECIFICATIONS:

Material: Carbon Steel
Strength: Yield 55,000 PSI
Line Direction: New, TBD
Maximum Strip Width: 8-1/2″ (215 mm)
Minimum Strip Width: 2.36″ (59.9 mm)
Maximum Strip Thickness: 1.30″ (33.0 mm)
Minimum Strip Thickness: .050″ (1.27 mm)
Maximum Strip Storage: 2000′ (600 M)
Maximum Fill Speed: 490 FPM (190 MPM)
Tube Mill Speed, Maximum: 180 FPM (55 MPM)

EQUIPPED WITH:
Twist Stands for Strip Entry
Pinch Roll Stand, AC Motor Drive
Accumulator Main Body
Turn Table Accumulation, AC Motor Drive
Angle Drum Spiral Track
Twist Stand for Strip Exit
Electrical Control System

SCOPE OF SUPPLY:

Machine shall be manufactured following the specification described above
Pipes and wires inside machine
Inspection and trial run before shipment
Documents: Machine general assemble drawing, Machine foundation drawing, Piping engineering drawing, Electric schematic diagram, Operation panel drawing, Hydraulic diagram, Consumable parts drawing, Operation manual and technical documents for commercial parts

OUT OF SUPPLY:
Foundation, Installation works and their materials
Piping and Wiring works and materials outside the machine at buyer site
Water supply system and air compressor
Oil for hydraulic, lubrication oil, grease and other oil
Spare parts, consumable materials and disassembling tools
Safety guards and covers for running machine.

WARRANTY:

One year of warranty term and long term service. The warranty term is calculated since twelve (12) months from the date of the first operation or sixteen (16) months from the date of shipment, whichever comes earlier.

Within warranty term, if any defect or deficiency is found on the machine or machine is under normal and proper operation, and such defect or deficiency is proved to fall under the responsibilities of the seller, and is accepted by seller, the seller will remedy it by repairing or supplying the necessary parts or materials.

The seller shall not be responsible for any consequential loss or damage resulting from any defect, or for any loss of earning time due to delays in installation or operation due to any such defect.

The seller’s warranty with respect to electrical equipment and commercial parts manufactured by others does not extend beyond that offered by original manufacturer to the seller.

VALIDITY:
The price is valid 30 days.

CARE IS TAKEN TO GIVE A RELIABLE DESCRIPTION OF THIS STRIP ACCUMULATOR BUT THESE ARE NOT GUARANTEED. PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS. WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS. ALL MACHINERY IS SUBJECT TO PRIOR SALE. CLICK HERE TO READ OUR TERMS AND CONDITIONS OF SALE.