1-1/2″ x .120″ PINES #1 Horizontal Tube Bender

Stock #: 3340

SKU: 3340 Categories: ,

UTUBE NUMBER: 3340
MANUFACTURER: PINES
MODEL NUMBER: 1
SERIAL NUMBER: 11040 – 71236
YEAR: 1971

SPECIFICATIONS:
Round Tube:
Maximum Tube Diameter: 1-1/2″ (38.1 mm)
Maximum Wall Thickness .109″ (2.76 mm)
Maximum Yield Pressure: 40,000 PSI
1″ (25.4 mm) Schedule 80 Steel
Square Tube:
Maximum Tube Diameter: 1.125″ (28.5 mm)
Maximum Wall Thickness: .120″ (3.04 mm)
Mild Steel
Maximum Tube Length Over Mandrel: 9′ 11″
Maximum Radius Standard: 8″
Maximum Radius Optional: 16″
Maximum Bend Angle: 180 Degrees + Over Bend for Spring Back
Bending Speed: 17 RPM Average
Operating Pressure: 1,000 PSI
Reservoir Capacity: 41 Gallons
Direction of Bend: Counter Clockwise
Pilot Operated

EQUIPPED WITH:
Centro Matic Lubrication System
Split Die Actuator
Complete Electrical Panel
Swing Arm, Forward / Reverse
Cycle Forward / Reverse
Motor Start / Stop
Off / Manual / Auto
Mandrel Extractor
Hydraulic Operation of Clamping and Pressure Dies
Manual Indexing Degree of Bend Turret (10) Settings
4″ Bend Cylinder
Motor: 7.5 HP – 220 / 60 / 3

OVERALL DIMENSIONS: 12′ x 5′ x 4′
APPROXIMATE WEIGHT: 2,800 Lbs.
LOCATION: Universal Warehouse, Perrysburg, Ohio

CARE IS TAKEN TO GIVE A RELIABLE DESCRIPTION OF THIS TUBE BENDER BUT THESE ARE NOT GUARANTEED. PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS. WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS. ALL MACHINERY IS SUBJECT TO PRIOR SALE. CLICK HERE TO READ OUR TERMS AND CONDITIONS OF SALE. VISIT UNIVERSALCONTROLSGROUP.COM FOR INFORMATION ON NEW CONTROL PANELS, DRIVE SYSTEMS AND PLANT AUTOMATION.