NEW 3.125″ (79.3 mm) x .134″ (3.40 mm) SFM Tube Mill Line

Stock #: 3602

UTUBE NUMBER: 3602
MANUFACTURER: SFM

SPECIFICATIONS:
Line Direction: Right to Left
Driven Spindle Diameter: 2-1/2″ (63.5 mm)
Maximum Tube Diameter: 3.125″ (79.3 mm)
Minimum Tube Diameter: 1″ (25.4 mm)
Maximum Round Wall Thickness: .134″ (3.40 mm)
Maximum Shapes Wall Thickness: .120″ (3.17 mm)
Minimum Wall Thickness: .032″ (.812 mm)
Single Point Adjustment
Welding Speed: 65 – 300 FPM (20 – 90 MPM)

ENTRY LINE:
(1) 10,000 Lb. KENT Double Uncoiler
Maximum Coil O.D.: 72″
(1) KENT Shear & End Welder
(1) KENT Model HC 100 Horizontal Accumulator

SFM FORMING MILL:
(1) Entry Guide Roll
(4) Driven Breakdown Stands with Single Point Adjustment
(3) Driven Fin Stands with Single Point Adjustment
(7) Idle Side Roll Units

WELDING SECTION:

(1) SAN FENG 300 KW Solid State High Frequency Welder
(1) Seam Guide
(1) 3 Roll Weld Pressure
(1) Double Bead Scarf Remover
(1) Coolant Zone, 20′ (6000 mm) Length

SFM SIZING MILL:
(4) Driven Sizing Stands with Single Point Adjustment
(4) Idle Side Roll Stands
(2) 8 Roll Turkshead Unit

CUT OFF:
(1) UCG #U-TRAK S3 High Speed Flying Cold Saw

DRIVE SECTION:
(1) Forming Motor: 75 HP / 56 KW AC Motor
(1) Fin Motor: 75 HP / 56 KW AC Motor
(1) Sizing Motor: 100 HP / 75 KW AC Motor

MOTORS:
3 Motor AC Vector Drive System built by UNIVERSAL CONTROLS GROUP

DELIVERY: 8 – 12 Weeks ARPO

NOTE: Quotation does not include installation or start-up. Start-up will be billed at standard T & M rates.

CARE IS TAKEN TO GIVE A RELIABLE DESCRIPTION OF THIS NEW TUBE MILL LINE BUT THESE ARE NOT GUARANTEED. PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS. WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS. ALL MACHINERY IS SUBJECT TO PRIOR SALE. CLICK HERE TO READ THE TERMS AND CONDITIONS OF SALE THAT APPLY TO THIS NEW TUBE MILL LINE. VISIT UNIVERSALCONTROLSGROUP.COM FOR INFORMATION ON NEW CONTROL PANELS, DRIVE SYSTEMS AND PLANT AUTOMATION.