3.125″ (79.3 mm) x .160″ (4 mm) High Frequency Tube Mill Line

Stock #: 3783

UTUBE NUMBER: 3783
MANUFACTURER: INDIA
MODEL NUMBER: 80.160

SPECIFICATIONS:
Line Direction: Right to Left
Maximum Tube Diameter: 3.125″ (80 mm)
Minimum Tube Diameter: 1″ (25.4 mm)
Maximum Wall Thickness: .160″ (4 mm)
Minimum Wall Thickness: .034″ (.86 mm)
Maximum Line Speed: 200 FPM, Maximum Gear in Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
Spindle Diameter: 2-1/2″ (63.5 mm)

ENTRY EQUIPMENT:
Double Uncoiler, 10,000 Lb. Capacity
Shear End Welder
Tiger Cage Accumulator

FORMING MILL:
Entry Guide Table, 4-Roll
(4) Driven Breakdown Stands
(6) Idle Side Rolls
(3) Driven Fin Stands

WELDING SECTION:
2016 SAN FENG 300 KW Solid State Welder
– Input: Volts: 480
– Amps: 500
– Freq. HZ: 60
– Phase: 3
– Heat Exchanger
3-Roll Weld Pressure Unit
Galvanized Re-Spray Unit
Coolant Section, Flood Type, 15′ Approximate

SIZING MILL:

(4) Driven Sizing Stands
(3) Idle Side Rolls
(1) Double Turkshead

ACRYLIC COATING SYSTEM:
Flood & Wipe Acrylic Application System with Pre-Treatment
Ajax Induction Unit for Drying

CUT-OFF:
3″ BETARAM Cut-Off with Hydraulic Clutch: (1) Double Cut Die, (2) Single Cut Dies
20′ Runout Table, Single Dump

MILL DRIVE:
(2) D.C. Motors, 440 / 60 / 3

TOOLING:
10 Sets: Tooling is believed to be complete sets, but suggest customer inspection to confirm.
Sizes Rounds: 1.315″, 1.660″, 1.900″, 2.375″, 2.875″
Square Sizes: 5/8″, 3/4″, 1″, 2″, 2-1/2″

APPROXIMATE LENGTH: 115′
APPROXIMATE WIDTH: 15′ – 20′

CARE IS TAKEN TO GIVE A RELIABLE DESCRIPTION OF THIS HIGH FREQUENCY TUBE MILL LINE BUT THESE ARE NOT GUARANTEED. PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS. WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS. ALL MACHINERY IS SUBJECT TO PRIOR SALE. CLICK HERE TO READ THE TERMS AND CONDITIONS OF SALE THAT APPLY TO THIS HIGH FREQUENCY TUBE MILL LINE. VISIT UNIVERSALCONTROLSGROUP.COM FOR INFORMATION ON NEW CONTROL PANELS, DRIVE SYSTEMS AND PLANT AUTOMATION.