3″ (76.2 mm) x .134″ (3.40 mm) T&H #WU-25 High Frequency Tube Mill Line

Stock #: 3649


UTUBE NUMBER: 3649
MANUFACTURER: T&H MACHINE
MODEL NUMBER: WU-25-1
SERIAL NUMBER: 1056

SPECIFICATIONS:

Line Direction: Right to Left
Maximum Tube Diameter: 3″ (76.2 mm)
Minimum Tube Diameter: 1″ (25.4 mm)
Maximum Wall Thickness: .134″ (3.40 mm)
Minimum Wall Thickness: .034″ (.86 mm)
Maximum Line Speed: 300 FPM, Maximum Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
Spindle Diameter: 2-1/2″ (63.5 mm)
Roll Space Forming: 12″ (304.8 mm)
Roll Space Fin & Sizing: 6-3/4″ (171.4 mm)

ENTRY EQUIPMENT:

Jib Crane, 6,000 Lb. Capacity
Double Uncoiler, KENT Model SKD, 10,000 Lb. Capacity
Shear End Welder, KENT Model 10-135
Floop, KENT Model R-227-RE

FORMING MILL:

Entry Guide Table, 4-Roll
(4) Driven Breakdown Stands
(6) Idle Side Rolls
(3) Driven Fin Stands

WELDING SECTION:

NEW! 250 KW ERWTech/UCG Solid State High Frequency Welder
– Year: 2020
– Input: Volts: 480
– Amps: 500
– Freq. HZ: 60
– Phase: 3
– Heat Exchanger: Powered XZ Axis for Head
– Motorized Adjustments
Seam Guide Unit
3-Roll Weld Pressure Unit
Coolant Section, Flood Type, 15′ Approximate

SIZING MILL:

(3) Driven Sizing Stands
(3) Idle Side Rolls
Straightener, Turkshead 4-Roll

CUT-OFF:

NEW! ERWTech/UCG 3″ (76.2 mm) High-Speed Flying Cold Saw
USED 20′ Runout Table, Single Dump

MILL DRIVE:

(3) 75 H.P., D.C. Motors, 440/60/3
CONTROL TECHNIQUES Mill Controls

TOOLING:

8 sets, Tooling is believed to be complete sets, but suggest customer inspection to confirm.
Sizes Rounds:
50 mm, 55 mm, 60 mm, 1.500″, 1.750″, 2.000″, 2.500″, 3.000″

APPROXIMATE LENGTH: 115′
APPROXIMATE WIDTH: 15′ – 20′
LOCATION: Universal Warehouse, Perrysburg, Ohio

CARE IS TAKEN TO GIVE A RELIABLE DESCRIPTION OF THIS 3 INCH TUBE MILL LINE BUT THESE ARE NOT GUARANTEED. PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS. WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS. ALL MACHINERY IS SUBJECT TO PRIOR SALE. CLICK HERE TO READ THE TERMS AND CONDITIONS OF SALE. VISIT UNIVERSALCONTROLSGROUP.COM FOR INFORMATION ON NEW CONTROL PANELS, DRIVE SYSTEMS AND PLANT AUTOMATION.