2″ (50.8 mm) x .074″ (1.88 mm) DONG WOO Tube Mill Line

Stock #: 740

SKU: 740 Categories: ,

UTUBE NUMBER: 740
MANUFACTURER: DONG WOO
AGE: 1990

SPECIFICATIONS:
Max. Tube Diameter: 2″ (50.8 mm)
Min. Tube Diameter: .500″ (12.7 mm)
Max. Wall Thickness: .074″ (1.88 mm)
Min. Wall Thickness: .018″ (0.5 mm)
Max. D/T Ratio: 60:1
Min. D/T Ratio: 10:1
Max. Material Yield: 50,000 PSI
Max. Mill Speed: 320 FPM (100 MPM) Max. Gear In Speed, No Load
Roll Space (Width) Forming: 7.750″ (196.8 mm)
Roll Space (Width) Fin & Sizing: 4″ (101.6 mm)
Driven Spindle Diameter: 2″ (50.8 mm)
Hand of Operation: Left to Right

ENTRY EQUIPMENT:
1- Double 4,000 Lb. Uncoiler w/Air Brakes
1- Hoop Cage Strip Accumulator

FORMING MILL- 30HP (22 KW) D.C. Motor, 850/2100 RPM
1- Entry Guide Unit w/5 Roll Idle Flattener
3- Driven Breakdown Stands
4- Idle Side Roll Units
2- Driven Fin Stands
1- Idle Side Roll

WELDING SECTION:
No Welder in this Line.
1- Rotary Seam Guide Unit
1- Weld Pressure Unit, 2 Roll
1- Double OD Scarfing Unit
1- Idle Side Roll

COOLANT SECTION
1- 12 Ft. Coolant Zone
SIZING MILL, 30 HP (22 KW) DC Motor and Drive, 850/2100 RPM
3- Driven Sizing Stands
4- Idle Side Roll Units
1- Rotary Squaring Turkshead Unit

CUT-OFF:
1- Flying Cut Off Saw (saw needs some work)
No Runout Table.
ELECTRICAL:
Solid State DC Drive System

CONDITION: Tube Mill Very Good.

Overall Dimensions: Multiple Pieces, 2 Truckloads
Approximate Weight: 35,000 Lbs.

LOCATION: Universal Warehouse, Perrysburg, Ohio