Inventory -> Tube Mills -> HF/ERW ->
1-1/4" (31.9mm) x .049" (1.2mm) YODER #M1-1/2 ERW Tube Mill
Machine #2905
Machine Class: Tube Mills
Machine Type: HF/ERW
Click here to request more
information on this machine.
Specifications
UTUBE NUMBER: 2905
MANUFACTURER: YODER
MODEL NUMBER: M1 1/2
SERIAL NUMBER: 38648 & 38650
PRELIMINARY SPECIFICATIONS:
Hand of Operation: Right to Left
Maximum Tube Diameter: 1.250" (31.9 mm)
Minimum Tube Diameter: .313" (8.0 mm)
Maximum Wall Thickness: .049" (1.2 mm)
Minimum Wall Thickness: .020" (0.50mm)
Maximum Line Speed: 150 FPM, Max. Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
GEAR BOX DATA:
Spindle Diameter: 1-1/2" (38.1 mm)
Roll Space Forming, Fin & Sizing: 8" (203.2mm)
Horizontal Centers: 11" (279.4 mm)
ENTRY EQUIPMENT:
1 - Kent Corporation #17.5-20.5 6,000 Lb. Double Uncoiler
2- Keeper, Hydraulic Expansion, Air Brake
1 - KENT Floop R-120
1 - KENT Shear & End Welder
FORMING MILL:
3 - Driven Breakdown Stands
5 - Idle Side Rolls w/Vertical Adjustment
2 - Driven Fin Stands
WELDING SECTION:
1 - YODER ERW Welder, MG Set, 150 HP
1 - Seam Guide
1 - Scarfing Stand
1 - Bead Winder
1 - Coolant Section - Flood Type
SIZING MILL:
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - Straightener, Turkshead
CUT OFF:
1 - YODER P-40 Cut-Off, 4-Post, Single Cut Die Set
Motor: 15 HP, 1145 RPM
1 - Run Out Table, 22', Single Dump
MILL DRIVE:
1 - Double Motor SIEMENS SIMOREG Drive System
2 - 25 H.P., D.C Motor, 440/60/3
1 - Mill Control Panel
ROLL TOOLING: 5/8" - 3/4"
Condition: Good as taken from service
Click here to
request more information on this machine.
CARE IS TAKEN TO GIVE RELIABLE DESCRIPTIONS BUT THESE ARE NOT GUARANTEED.
PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS.
WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS.
ALL MACHINERY IS SUBJECT TO PRIOR SALE.
Click Here For Conditions Of Sale
|
