Inventory -> Tube Mills -> HF/ERW ->
.640” (16.25MM) ABBEY ETNA #2X - 2K Reducing Type Mill Line
Machine #2839
Machine Class: Tube Mills
Machine Type: HF/ERW
Click here to request more
information on this machine.
Specifications
UTUBE NUMBER: 2839
MANUFACTURER: Abbey Etna
MODEL NUMBER: 2X Forming - 2K Reducing
SERIAL NUMBER:
PRELIMINARY SPECIFICATIONS:
Type: Stretch Reduced Tube Mill
Hand of Operation: Right to Left
The tube is welded at .640" and reduced to smaller sizes
ENTRY EQUIPMENT:
1 - 3,000 Lb. (1.5 Ton) Double Uncoiler
1 - Tiger Cage Accumulator
1 - Entry Guide w/Edge Trim
1 - Shear & End Welder
FORMING MILL:
Entry Guide Unit
3- Driven Breakdown Stands
3- Driven Fin Passes
5- Idle Side Roll Units
1- 20 H.P. D.C. Motor
Weld Section:
1- Seam Guide Unit
1- Rotary Resistance Welder
1- Scarfing Unit
1- Coolant Section
REDUCING (Sizing) MILL (1):
7- Driven Reducing Stands
7- Idle Side Roll Units
7- 7.5 H.P. D.C. Motors
REDUCING (Sizing) MILL (2):
5- Driven Reducing Stands
5- Idle Side Roll Units
5- 7.5 H.P. D.C. Motors
1- 4-Roll Straightener
EQUIPPED WITH:
Run Out Table
Transfer Table
Tooling to Produce the following Sizes:
5/16", 3/8", .344" All Produced From 1/2" Welded Tube
NOTE: Tooling is believed to be complete, but suggest customer
inspection to confirm.
Replacement Cost for a New Machine is approximately $1,900,000.
Click here to
request more information on this machine.
CARE IS TAKEN TO GIVE RELIABLE DESCRIPTIONS BUT THESE ARE NOT GUARANTEED.
PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS.
WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS.
ALL MACHINERY IS SUBJECT TO PRIOR SALE.
Click Here For Conditions Of Sale
|
